Ultrasonic flaw detector-thickener UDS2-RDM-34T is designed for non-destructive testing of metal structures of railroad bridges in order to detect metal corrosion, fatigue and corrosion-fatigue cracks, defects in welds, as well as for the control of metal structures of hoisting machines.

The device allows you to fulfill the requirements and implement the methods set forth in the following normative documents:

• OST 32100-87 “Ultrasonic inspection of welded joints of bridges, locomotives wagons”
• RD ROSEC-001-96 “Lifting machines. Metal structures Control, ultrasonic Basic provisions”.
• RD ROSEC-006-97 “Lifting machines. Metal structures.
• Ultrasonic thickness measurement. Fundamentals.”

The device can also be used for control of welded joints, for control of steam and hot water pipelines, steam and water heating boilers in accordance with RD 34.17.302-97 (OP 501 CD -97).

Distinguishing Features:

• estimation of metal thickness under the protective coating
• Possibility of monitoring in harsh climatic conditions at ambient air temperature from -40°C to +50°C
• continuous operation time of the flaw detector from the rechargeable battery up to 13 hours.

Characteristic detectable defects:

1. shrinkage shells
2. gas bubbles
3. small pore clusters
4. slag inclusions
5. cracks
6. lateral and root failures
7. foreign inclusions

The rugged metal housing is designed for heavy duty applications.

Ultrasonic flaw detector-thickener UDS2-RDM-34T is included in the State Register of Measurement Devices of the Russian Federation.
UDS2-RDM-34T is certified in the Russian Maritime Register No. 07.01824.011